1 technical data sheet mmcx jack connector crimp/solder attachment for rg178, rg196 mmcx jack connector crimp/solder attachment for rg178, rg196 confguration connector mmcx jack connector interface type rg178,rg196 cable attachment method (shield/contact) crimp/solder body style straight electrical specifcations frequency range, ghz dc to 3 impedance, ohms 50 maximum vswr 1.22:1 maximum operating voltage, volts 170 dielectric withstanding voltage, vrms 500 mechanical specifcations temperature operating range, deg c -55 to +155 size length, in [mm] 0.46 [1 1.68] width/dia., in [mm] 0.135 [3] . weight, lbs [g] 0.002 [0.91] connector type mmcx jack contact material and plating beryllium copper , gold contact plating specifcation 30 in. minimum body material and plating brass, gold body plating specifcation 3 in. minimum dielectric type t efon compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es plotted and other data notes: v alues at 25 c, sea level click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: mmcx jack connector crimp/solder attachment for rg178, rg196 PE4902 PE4902 PE4902 rev
2 technical data sheet mmcx jack connector crimp/solder attachment for rg178, rg196 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: mmcx jack connector crimp/solder attachment for rg178, rg196 PE4902 url: http://www.pasternack.com/mmcx-jack-standard-rg178-rg196-connector-PE4902-p.aspx mmcx jack connector crimp/solder attachment for rg178, rg196 PE4902 PE4902 rev
? 2013 pasternack enterprises all rights reserved 3 PE4902 rev dwg title PE4902 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. strip cable as shown. do not nick braid while cutting jacket. 2. slide insert (1) over braid and against the jacket, form braid over insert (1). trim braid back to shoulder. cut dielectric and center conductor to dimension shown. tin center conductor. 3. solder contact (2), to center conductor remove excess solder. slide body over contact and insert (1). then crimp body (3). assembly procedures ferrule: .100" hex crimp tool crimp size required cad file 021513-a scale n/a size a 127 fscm no. 53919 rev. a mmcx jack connector crimp/solder attachment for rg178, rg196 PE4902 cad drawing
|
